Primer
For porous masonry surfaces.
Description
An acrylic based liquid used to prime porous surfaces. Use on concrete, brick, block, cement render, fibre cement and gypsum building boards. Use internally and externally.
Coverage (Approximate) 8m2/litre.
Surface Preparation
The surface to be primed must be firm and free of all contaminants, i.e., dirt, oil, grease, curing compounds, release agents and must be dry.
Application
Ready to use. Shake prior to use. Do not dilute. Apply with a broom or brush, forcing it into the surface pores and allow to dry for approximately 15 minutes. Not for use on non-porous substrates, damp/immersed applications or aerated concrete block, use Primax. On very porous surfaces a second coat is required.
Drying Time
Allow to dry 15-30 minutes at 23°C @
50% relative humidity.
Brochure
